DMM treeMOTION Hitch Climber

DMM treeMOTION Hitch Climber

$84.95 AUD

Details

Product Code:
035828
Weight:
0.13 kg
Per:
Each

Options

treeMOTION Hitch Climber

The concept is simple - compact rigging plate and high efficiency pulley in one!
Developed with those clever folk at DMM, this is the first hot forged pulley to hit the market. Blessed with sensual curves and many little details, this little beauty was designed to be at the heart of friction hitch climbing systems (with stitched eye to eye slings), but has many other applications. Taking the place of conventional fairlead pulleys, the Hitch Climber helps organise karabiners, reducing the probability of poor configurations such as cross loading. Tension in the climbing line is transferred through both karabiners and the rigging plate. Doesn?t matter if you are ascending or descending, karabiners tend to be kept in the correct alignment. The full range of anchor point sizes, from pulley saver to large stem, are accommodated without changing the everyday set-up. The climbing line is pretty much left alone by the pulley until it is needed, there is less friction build up below the hitch. That means the friction hitch will ?self-tail? sooner. It?s possible to use shorter (stitched) slings for tying your hitch too, which reduces ?sitback? when ascending. When things get a bit more complex, the three holes of the Hitch Climber will accommodate the variety of different rope techniques that allow us climbing arborists to work the canopy. A complete second climbing system (or lanyard) can be added to the spare hole, making it easier to traverse between two anchors. There are even rescue and load hauling functions! A loop of rope taken from between the hitch and the pulley can be lowered to a ground worker. Loads can be connected into the loop and hauled back up by the ground worker. It has never been so easy to get that big Stihl to a climber! And because life doesn?t always go to plan, there are abilities in this system that would be useful in a rescue. If the casualty is positioned in such a way that lowering is impractical (e.g. over water, a road or electrical conductors) the system can be used in reverse. The rescuer can haul from above on the casualty?s system on what is effectively now a braked 3:1 mechanical advantage system. Once in a better position, the descent could take a different route. In a ?pick-off? rescue, friction can be easily added above the rescuers hitch to keep the operation of his/her system much the same as normal.

An addition to the generic user instructions called ?The Hitch Climbers? Guide to the Canopy helps show how Hitch Climber really can perform! Certification treeMOTION is certified to EN358 (Work Positioning Belt) and EN813 (Sit Harness).

Click the following link for an in depth look at the Hitch Climber.
http://www.treemagineers.com/downloads/hitch_climbers_guide.pdf

Ocean Polyester cord and its? stitched terminations are CE marked via a manufacturers standard under the quality management system ISO 9001:2000.

Hitch Climber pulley meets and exceeds the requirements of EN12278 (Pulleys) and EN795(c) (Anchor devices).

Sheaves: 1
Max Load: 3,000 kg
SWL: 600 kg
Rope: 14mm
Weight: 79g

 

Seen our product priced lower elsewhere?

NB: Mandatory fields are denoted by an asterisk (*).

AUD (inclusive of tax & shipping)

At Atraes We pride ourselves with serving our customers in the very best way we can, if you find an item that we stock at a cheaper price we will sell the item to you at the price you found less 10% of the difference between the two prices.

**This offer is subject to the following conditions:

  • The item must be in stock with one of our Suppliers
  • The product must be identical to the cheaper one
  • The product must be on offer from an Australian based retailer
  • We must be able to verify the offer
  • Excludes trade quotations, sales, stock clearances and commercial quantities.